Price List		AWS 10kW WIND ENERGY SYSTEM
AEP 10 kW SPECIFICATIONS:		The AWS 10-kilowatt wind turbine is designed to supply most of the electricity for a cluster of homes in remote areas were there is no, or insufficient power from the utility grid. Average wind speed should be about 5m/s. At this wind velocity it will continuously provide about 1400 Watt. It should be connected to a suitable sized battery bank to store back-up energy to be used during times when wind speeds are low. Installed in combination with an inverter the system will supply utility grade 220 Volt AC power. The inverter should be sized to match peak the load. Available inverter sizes are 1.5 kW, 2.5 kW and 4 kW. Simple and rugged, the AWS 10 kW is designed for high reliability, low maintenance, and automatic operation in adverse weather conditions. Most recently we installed an AWS 10 kW in Thangu (North Sikkim) at an elevation of 14.000 ft for the Indian Army.
START -UP WIND SPEED	3.3 m/s
CUT-IN WIND SPEED	3.3 m/s
RATED WIND SPEED	12.9 m/s
RATED POWER	10 kilowatts
CUT-OUT WIND SPEED	None
FURLING WIND SPEED	15.0 m/s
MAX DESIGN WIND SPEED	55 m/s
TYPE	3 Blade Upwind
ROTOR DIAMETER	7.0 m
BLADE PROFILE	NACA
WEIGHT	480 kg
OVERSPEED PROTECTION	FURLING
GEARBOX/BELTS	None, Direct Drive
TEMPERATURE RANGE	-40 to +60 C
GENERATOR	Permanent Magnet Alternator
OUTPUT	3 Phase AC Variable Frequency
WITH CONROLER	Regulated DC, 120V
WITH INVERTER	Single Phase 220V 50 Hz

Typical System lay-out (right)

AWS 10 kW PERFORMANCE (below)